| _main_image | /conversions/M1010100A2216.JPG |
|---|---|
| Cutting diameter (Ds) | 100 mm |
| Cutting width minimum (b1) | 16 mm |
| _application | /conversions/M1010080A1614_PICTO.JPG |
| DIN_CCTWS | HORN-101160058N |
| DIN_CCTMS | FDA02202200 |
| Diameter of the mandrel (dK) | 405 mm |
| Diameter facing system for disk cutters (d2) | 22 mm |
| _drawing | /conversions/M101_A_20161108_113949879.JPG |
| _download | /documents/M1010100A2216_20210629_183438867.DXF; /documents/M1010100A2216_20230114_043300134.STP |
| ISO-CCTWS | HORN101160058N$$$$$ |
| ISO-CCTMS | FDA22G2200$$$$ |
| _icon | nutfraesen.jpg; trennfraesen.jpg |
| Katalog-CCTWS | 10116 |
| Number of teeth (Z) | 9 St |
| Miller length with indexable insert (hmax) | 37 mm |
| Mounting hole depth (l1) | 20 mm |
| Length from stop to center insert (l4) | 247 mm |
| Maximum milling depth/ depth of groove (w) | 28 mm |
| productnr-sap | M1010100A2216 |
| Plating seat size (Größe) | 16 |
| Number of revolutions maximum (nmax) | 5000 Min-1 |
| Wide disc cutter without cutting insert (b) | 13 mm |
Write Your Own Review