| _main_image | /conversions/M1010080A1620.JPG |
|---|---|
| Cutting diameter (Ds) | 80 mm |
| Cutting width minimum (b1) | 2 mm |
| _application | /conversions/M1010080A1614_PICTO.JPG |
| DIN_CCTWS | HORN-101200058N |
| DIN_CCTMS | FDA01602200 |
| Diameter of the mandrel (dK) | 37 mm |
| Diameter facing system for disk cutters (d2) | 16 mm |
| _drawing | /conversions/M101_A_20161108_113949879.JPG |
| _download | /documents/M1010080A1620_20210629_183409164.DXF; /documents/M1010080A1620_20210630_170519667.STP |
| ISO-CCTWS | HORN101200058N$$$$$ |
| ISO-CCTMS | FDA22G1600$$$$ |
| _icon | nutfraesen.jpg; trennfraesen.jpg |
| Katalog-CCTWS | 10120 |
| Number of teeth (Z) | 7 St |
| Miller length with indexable insert (hmax) | 33 mm |
| Mounting hole depth (l1) | 18 mm |
| Length from stop to center insert (l4) | 227 mm |
| Maximum milling depth/ depth of groove (w) | 20 mm |
| productnr-sap | M1010080A1620 |
| Plating seat size (Größe) | 20 |
| Number of revolutions maximum (nmax) | 6000 Min-1 |
| Wide disc cutter without cutting insert (b) | 16 mm |
Write Your Own Review