| _main_image | /conversions/DAM32025M12503B.JPG |
|---|---|
| Cutting diameter (Ds) | 25 mm |
| _application | /conversions/DAM31016M08302B_PICTO.JPG |
| DIN_CCTWS | HORN-DA32253N |
| DIN_CCTMS | HORN-01200105 |
| Diameter miller body (d4) | 24 mm |
| _drawing | /conversions/DAM32M_20161108_120341442.JPG |
| _download | /documents/DAM32_025_M125_03B_20171121_211145147.STP; /documents/DAM32025M12503B_20210629_145408302.DXF |
| ISO-CCTWS | HORNDA3225$$3N$$$$$ |
| ISO-CCTMS | HORN01200105$$ |
| _icon | eckfraesen.jpg; planfraesen.jpg; rampe_eintauchen.jpg; zirkulareintauchen.jpg |
| Katalog-CCTWS | DA3225 |
| Key range (SW) | 17 mm |
| Number of teeth (Z) | 3 St |
| Maximum stepover (ap) (ap) | 48 mm |
| Length from stop (l2) | 30 mm |
| productnr-sap | DAM32025M12503B |
| Screw thread (d2) | M12 |
| Neck diameter on stop (d4) | 21 mm |
| Total milling length with insert (h) | 52 mm |
| Katalog-CCTMS | 12001 |
Write Your Own Review