| _main_image | /conversions/DAM32020M10402B.JPG |
|---|---|
| Cutting diameter (Ds) | 20 mm |
| _application | /conversions/DAM31016M08302B_PICTO.JPG |
| DIN_CCTWS | HORN-DA32203N |
| DIN_CCTMS | HORN-01000105 |
| Diameter miller body (d4) | 19 mm |
| _drawing | /conversions/DAM32M_20161108_120341442.JPG |
| _download | /documents/DAM32_020_M104_02B.STP; /documents/DAM32020M10402B_20210629_121809768.DXF |
| ISO-CCTWS | HORNDA3220$$3N$$$$$ |
| ISO-CCTMS | HORN01000105$$ |
| _icon | eckfraesen.jpg; planfraesen.jpg; rampe_eintauchen.jpg; zirkulareintauchen.jpg |
| Katalog-CCTWS | DA3220 |
| Key range (SW) | 15 mm |
| Number of teeth (Z) | 2 St |
| Maximum stepover (ap) (ap) | 48 mm |
| Length from stop (l2) | 25 mm |
| productnr-sap | DAM32020M10402B |
| Screw thread (d2) | M10 |
| Neck diameter on stop (d4) | 18 mm |
| Total milling length with insert (h) | 45 mm |
| Katalog-CCTMS | 10001 |
Write Your Own Review