| _main_image | /conversions/DAM31032M16605B.JPG |
|---|---|
| Cutting diameter (Ds) | 32 mm |
| _application | /conversions/DAM31016M08302B_PICTO.JPG |
| DIN_CCTWS | HORN-DA31323N |
| DIN_CCTMS | HORN-01600105 |
| Diameter miller body (d4) | 31 mm |
| _drawing | /conversions/DAM32M_20161108_120341442.JPG |
| _download | /documents/DAM31_032_M166_05B.STP; /documents/DAM31032M16605B_20240205_230101138.DXF |
| ISO-CCTWS | HORNDA3132$$3N$$$$$ |
| ISO-CCTMS | HORN01600105$$ |
| _icon | eckfraesen.jpg; planfraesen.jpg; rampe_eintauchen.jpg; zirkulareintauchen.jpg |
| Katalog-CCTWS | DA3132 |
| Key range (SW) | 24 mm |
| Number of teeth (Z) | 5 St |
| Maximum stepover (ap) (ap) | 3 mm |
| Length from stop (l2) | 35 mm |
| productnr-sap | DAM31032M16605B |
| Screw thread (d2) | M16 |
| Neck diameter on stop (d4) | 29 mm |
| Total milling length with insert (h) | 58 mm |
| Katalog-CCTMS | 16001 |
Write Your Own Review