| _main_image | /conversions/DAM31016M08302B.JPG |
|---|---|
| Cutting diameter (Ds) | 16 mm |
| _application | /conversions/DAM31016M08302B_PICTO.JPG |
| DIN_CCTWS | HORN-DA31163N |
| DIN_CCTMS | HORN-00800105 |
| Diameter miller body (d4) | 15 mm |
| _drawing | /conversions/DAM32M_20161108_120341442.JPG |
| _download | /documents/DAM31016M08302B_20210629_121434607.DXF; /documents/DAM31016M08302B_20230112_175711399.STP |
| ISO-CCTWS | HORNDA3116$$3N$$$$$ |
| ISO-CCTMS | HORN00800105$$ |
| _icon | eckfraesen.jpg; planfraesen.jpg; rampe_eintauchen.jpg; zirkulareintauchen.jpg |
| Katalog-CCTWS | DA3116 |
| Key range (SW) | 10 mm |
| Number of teeth (Z) | 2 St |
| Maximum stepover (ap) (ap) | 3 mm |
| Length from stop (l2) | 20 mm |
| productnr-sap | DAM31016M08302B |
| Screw thread (d2) | M8 |
| Neck diameter on stop (d4) | 13 mm |
| Total milling length with insert (h) | 38 mm |
| Katalog-CCTMS | 08001 |
Write Your Own Review